Eventide Omnipressor 2830Au

1759.16 GBP*

Description

Dynamics processor incl. compressor, gate, expander, dynamic reversal, bypass, side chain, function control and link function Analog compressor in reissue for the 50th anniversary Professional-level dynamic processing with: Dynamic Reversal Infinite Compression Compressor Gate Expander Function control Link function (stereo operation possible) Bypass function Backlit meter incl. accessories: 1x mains cable poster and sticker 1x manual 1x Eventide guitar pick Reissue with even more possibilities The Eventide Omnipressor 2830Au is a device for dynamic processing of audio signals with unique features. These include"Dynamic Reversal", which reverses the levels: A signal with -10dB becomes a signal with +10dB and vice versa. This allows effects such as"talking backwards" with voice signals or reversing the attack/decay envelopes of instruments to be realized. The Omnipressor 2830Au also offers an"Infinite Compression" function, which means that the output level remains unchanged regardless of the input level. The bypass function, which can be selected via the "Line" switch, also makes A/B comparisons possible. Compressor functions In addition to these features, the classic compressor functions are of course also available. The"Function" knob can be used to continuously adjust the working mode (ratio) of the device. The "Atten Limit" and "Gain Limit" controls are also located in this section. "Atten Limit" determines the maximum attenuation (1 - 30dB) of the Omnipressor, while"Gain Limit" limits the maximum amplification of the device (1 - 30dB). The knobs for"Threshold","Attack Time" and"Release Time" are also located on the left-hand side of the Omnipressor, with whose settings the compressor then works. If it is desired to attenuate bass signals or that these only have a minor influence on the compression/expansion, this can be done with the associated"Bass Cut" switch. In addition, an LED has been built into this switch so that it is immediately visible when the bass cut function is switched on. The Omnipressor also has a side chain function that can be used to integrate additional effect devices into the signal path. An LED has also been installed here, which lights up when the side chain is active. Finally, the Eventide Omnipressor 2830Au offers the option of connecting two (or more) devices with each other using the link function, for example to work in stereo mode. Connections: Line In: 1x 6.35mm jack (TRS), 1x XLR-3pin Line Out: 1x 6.35mm jack (TRS), 1x XLR 3-pin Link In/Out: 6.35mm jack (TRS) each Side Chain In: 1x 6.35mm jack (TRS), 1x XLR-3pin Side Chain Out: 1x 6.35mm jack (TRS), 1x XLR-3pin Further technical data: Impedance input/output: 600Ω each Frequency range: +0, -½dB 20Hz-16kHz; +0, -1dB 15Hz-20kHz Gain: -12dB to +12dB depending on output level SNR: -90dB Distortion: 0.05% between 20Hz and 20kHz Weight: 4.44kg Dimensions (H x W x D): 88mm x 483mm x 226mm 2 HU installation height Manufacturer information Sound Service...