Dangerous Music Source USB Monitor Controller

1002.29 GBP*

Description

The Dangerous Source is a portable monitor controller with audio compromise. It provides the critical link between ... USB monitor controller The Dangerous Source is a portable monitor controller with audio compromise. It provides the critical link between your ears and the music. Every tracking and mixing decision hinges upon what you hear: how to locate the microphone's sweet spot for the perfect vocal, where to place the panning to define each instrument's space, creating the perfect marriage of kick and bass in the track… Plug in two pairs of headphones and get inspired with a Dangerous caliber headphone amp. Select any of the four sources individually or at the same time- plug your iPod into AN2 and jam along in AN1. Listen to any combination of sources from either section. For example, let the singer hear their own personal headphone mix from the AN2 input, while you engineer the real mix, coming from the USB input. There's even a line level control room output, mirroring the speaker selector for dubbing, sampling or running external meters. Switch between two sets of speakers... or use one output for a subwoofer... or play them both at once to blow up the neighborhood. Built for life on the road, slide the Source into your backpack and hit the streets. The main features of the Dangerous Source include: Portable or Rack Installable (kit optional) 2 Speaker Outputs- Can Be Engaged Simultaneously Headphones Can Monitor Single or Multiple Sources 2 Analog Inputs: 1/8" Mini Stereo & XLR/TRS Combo Jack 2 Onboard Stereo 24-bit/192kHz D/A Converters 2 Digital Inputs: AES/SPDIF and USB USB IN, up to 24-bit/192kHz for Windows and Mac Input 1 to Selected Line Out and Speakers: Frequency Response: +0, -0.5dB from 80 kHz THD+N: < 0.0025% @+4dBu IMD (SMPTE): < 0.0025% @ +4dBu Crosstalk rejection: >108dB Noise: < -93 dB, unweighted NOTE: Speaker outs can run at -6dB (factory setting) or unity gain (remove jumpers 3 and 4) Maximum input level: > +26 dBu Input 2 to selected line out and Speakers: Frequency Response : +0, -0.5dB from 80 kHz THD+N: < 0.0025% @ +4dBu IMD (SMPTE): < 0.0026% @ +4dBu Crosstalk rejection: > -98dB Noise: < -90 dB, unweighted NOTE: Input 2 can run at -10dBV or -16dBV (by setting JP1 and JP2. Remove for -10dBV) Default factory setting is -16dBV to accommodate 1/8" headphone outputs of iPhones and cell phones Frequency Response: +0, -0.5dB from 50kHz Outputs: The meter and speakers outputs are fully balanced and 600 ohm drive capable to >+26dBu. Volume knobs track better than +- 0.5dB from unity to -40dB. The headphone amp can easily drive several sets of cans. Maximum output level: > +26 dBu Shipping weight (in carton): 7 lbs. Dimensions: 12 3/4" Wide x 8" Deep x 1 5/8" High Digital inputs: The AES inputs lock from 32kHz to 192kHz sample rates with the following: 103dB Power Supply: 12 volt, 2 Amp (Part number PSU-SRC) Optional Rack Kit: SRC (Source Rack Kit), $49.99 USB Compatibility: Mac: Requires Mac OS 10.6 or higher for...